RingRacer

Back to prototypes

Driving ยท 3D perspective

RingRacer

We made a 3D driving prototype to find out what depth and steering feel like when the world wraps around the room.

The RingRacer driving prototype displayed on the Ring.
Our multiplayer driving prototype on the cylindrical display.

What we built

RingRacer started as a single-car track. We then made a shared arena for two to four drivers, so we could see how people made sense of the same space from different places around the Ring.

Iterations and findings

  1. A single car on a curved track

    We tested different camera approaches, then mapped a central 360ยฐ capture to the cylinder and updated its heading with the car. We used timed laps, cones, and off-road slowdown to give the demo a route to follow.

    What we foundNearby objects swept past faster than distant mountains, which made speed and depth easier to feel. In our earlier viewpoint-camera tests, the picture could double between the intended viewing positions.

  2. A shared arena for up to four drivers

    We added different car colors, a white fence around the arena, and a flash to help drivers locate their cars before the countdown ended. We also tried ramming and coin drops.

    What we foundGuests liked moving around the Ring once they knew they could. Steering while judging depth and keeping track of the arena was demanding. Tom also told us it was hard to form a mental map, even though he saw promise in the 3D rendering.

What we tried on the Ring

We used motion through a 3D world to test depth on a surface that curves all the way around the players. The same world had to make sense when drivers stood in different places.

What we learned about designing for the Ring

  • Give drivers landmarks they can use to build a map of the arena.
  • Check where steering and depth cues become hard to read as people move.
  • Show players early that walking around the screen is part of the experience.

Related devlogs

– An ETC Project –